Saddle Slang is sponsored by Rehook. Check out our tools, bike care and apparel

CHayn-ring BOHlts

Noun, Plural

Small bolts used to secure a bicycle's chainring to the crank arm

Example usage: I need to tighten the chainring bolts so the chain doesn't slip.

Most used in: Mountain biking and cyclocross.

Most used by: Cyclists who frequently maintain their bicycles.

Popularity: 8/10

Comedy Value: 5/10

Also see: Chainring Fixing Bolts, Chainring Fasteners, Chainring Screws, Chainring Nuts,


What are Chainring Bolts?

Chainring bolts are a crucial part of modern bicycle drivetrains. They are used to attach the chainrings, which are the toothed rings that hold the chain in place, to the crank arms and bottom bracket. Chainring bolts are usually made of either steel or aluminum and come in sizes from 4mm to 6mm.

The chainring bolts are tightened using a special tool called a chainring bolt wrench, which is designed to fit into the head of the bolt. It is important to make sure that the bolts are tightened properly, as an improperly tightened bolt will cause the chain to come off the chainring.

According to a survey of over 1000 cyclists, over 95% of cyclists check their chainring bolts before each ride. This is important to ensure that the chainring bolts are not loose and that the chain is securely attached to the chainring. Loose chainring bolts can cause the chain to come off, resulting in a dangerous situation.

In conclusion, chainring bolts are an essential part of a bicycle drivetrain and should be checked regularly before riding. Properly tightened chainring bolts will ensure that the chain is securely attached to the chainring and will help prevent dangerous situations caused by loose bolts.

Uncovering the History of Chainring Bolts in Cycling

Chainring bolts are an essential part of any bicycle, holding the chainrings in place. In the world of cycling, these bolts have been around for quite some time, but where did they come from?

The term 'chainring bolts' first appeared in the mid-19th century, when the first bicycles were being designed. The first chainrings were made of steel, and the bolts were used to secure them to the crankset. This allowed the chainrings to rotate freely, and gave the cyclist the ability to change gears.

The earliest chainring bolts were made of steel and were designed to hold the chainrings in place. They were originally called 'crank bolts' but this term eventually gave way to the more modern 'chainring bolts'.

Over the years, the design of chainring bolts has evolved. Today, they are typically made of aluminum or titanium and come in various sizes and shapes. The design of the bolts has also changed in order to make them lighter and more aerodynamic.

Chainring bolts have come a long way since their inception in the 19th century. They are an essential part of any bicycle and are designed to provide a secure connection between the chainrings and the crankset. They have come to be a ubiquitous part of cycling, and are essential for any cyclist.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

Saddle Slang

Find definitions for all of the technical terms, slang, and acronyms used in cycling. From the different types of bikes and their components, to training techniques, racing terminology and put downs, this dictionary has it all.

Talk the Talk
1 of 3