Chainring Rev-uh-loo-shuhnz
Noun, Plural
Chainring Revolutions refer to the number of times the pedals must be turned in order to make one full rotation of the chainring.
Example usage: I was able to get a good workout in with my chainring revolutions set to a high number.
Most used in: Cycling circles in the United States.
Most used by: Cyclists who are looking to track their progress and increase their performance.
Popularity: 8 out of 10.
Comedy Value: 3 out of 10.
Also see: Crank Rotations, Pedal Revolutions, Cadence, Chainring Rotations,
What are Chainring Revolutions?
Chainring revolutions, or simply “revs”, is a term used in cycling to refer to the number of times the chainring rotates around the bottom bracket axle. It is the most common measure of pedalling output power and performance. It is measured in revolutions per minute (RPM) and is used to determine the speed and efficiency of a cyclist’s pedalling.
Chainring revolutions are a key metric for cyclists to monitor when training and racing. Higher revs commonly indicate increased power output, however, this is not always the case. A cyclist’s cadence and efficiency can be just as important as revs in determining performance.
On average, a cyclist’s cadence should be between 70-100 RPM, but this can vary depending on the type of ride and terrain. For example, a cyclist on a hill may have a lower cadence, while a flat terrain may require a higher cadence. Monitoring chainring revolutions is an important factor in assessing performance and can help cyclists improve their overall fitness.
The Origin of the Cycling Term 'Chainring Revolutions'
The term 'Chainring Revolutions' first appeared in the early 2000s in the cycling world, used to refer to the number of times a cyclist’s pedals make a full rotation of the crank. It is thought to have originated from the cycling community in the United Kingdom.
The term was first used to describe the speed of a cyclist’s pedalling, with a higher number of chainring revolutions indicating a greater speed. It is now used to refer to the number of times the crank arm and pedals rotate in a given time period, typically measured in revolutions per minute (RPM).
Chainring revolutions are a popular metric for measuring a cyclist’s performance as it provides a direct indication of the cyclist’s speed and power output. It is used in a variety of cycling disciplines, from road racing to mountain biking.
Today, the term 'Chainring Revolutions' is used widely by cycling enthusiasts and professionals alike to measure and compare their performance.
