Saddle Slang is sponsored by Rehook. Check out our tools, bike care and apparel

krang spee-d

Noun, Verb

Crank speed is the rate of rotation of the pedals on a bicycle.

Example usage: I need to increase my crank speed to keep up with the other cyclists.

Most used in: Cycling circles in Europe and North America.

Most used by: Professional and competitive cyclists.

Popularity: 8/10

Comedy Value: 2/10

Also see: Cadence, Pedal RPM, Pedal Rate, Pedaling Rate

What is Crank Speed?

Crank speed is a cycling term that refers to the rotational speed of the crankset, which is the assembly of the crank arms, chainrings and bottom bracket that drives the chain. It is usually measured in revolutions per minute (RPM).

In cycling, it is important to maintain a consistent crank speed as it helps to maintain a steady power output. A higher crank speed results in a higher overall speed, while a lower crank speed can help to conserve energy. Elite cyclists can reach crank speeds of up to 180 RPM, while recreational cyclists typically range between 60 to 120 RPM.

In order to measure crank speed, cyclists use a cadence sensor, which is a device that is attached to a bike and measures the revolutions of the crankset. It is a useful tool for cyclists to track their performance and adjust their riding technique accordingly.

Overall, crank speed is an important concept to understand for cyclists as it has a direct impact on their overall performance. By understanding crank speed and how to measure it, cyclists can better optimize their technique and reach their cycling goals.


Crank Speed: The Cycling Term with an Interesting Origin

The cycling term “crank speed” has an interesting origin. It first appeared in the 19th century in England, when cyclists began to use the phrase to refer to the speed of a bicycle or tricycle. The term stems from the fact that the pedals of a bicycle or tricycle are connected to a crank, which is a rotating shaft that converts rotary motion into linear motion. The speed of the crank is directly related to the speed of the bicycle or tricycle, hence the term “crank speed”.

In the early 20th century, the term “crank speed” was adopted by the racing community, who used it to refer to the speed of cyclists in races. It was also adopted by motorcyclists, who began to use it to describe the speed of their bikes. Today, the term is still used by cyclists, racers, and motorcyclists to refer to the speed of their vehicles.

It is interesting to note that the term “crank speed” is still in use today, despite the fact that it was first used in the 19th century. This is a testament to the enduring popularity of cycling, and the fact that the term has stood the test of time.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

Saddle Slang

Find definitions for all of the technical terms, slang, and acronyms used in cycling. From the different types of bikes and their components, to training techniques, racing terminology and put downs, this dictionary has it all.

Talk the Talk
1 of 3