Saddle Slang is sponsored by Rehook. Check out our tools, bike care and apparel

drop-out ah-djust-urs

Noun, Verb

A component used to adjust the dropout width of a bicycle frame.

Example usage: 'I need to adjust the dropout width of my bike frame, so I'm going to use some dropout adjusters.'

Most used in: Bike shops and bike maintenance workshops.

Most used by: Bicycle mechanics, bike builders, and experienced cyclists.

Popularity: 8/10

Comedy Value: 4/10

Also see: Dropout Bolts, Derailleur Hanger Bolts, Axle Adjusters, Chain Tensioners,


What Are Dropout Adjusters?

Dropout adjusters are a type of bicycle component that are used to adjust the width between the rear dropouts of the frame. The dropouts are the slots at the end of the rear stays of the frame that the rear wheel axle fits into. The dropouts are usually set to a standard width, but dropout adjusters provide the means to adjust the width of the dropouts.

Dropout adjusters can be used for a variety of reasons, such as altering the chainstay length of the frame, adjusting the wheelbase, or allowing a different wheel size to be fitted. They are also useful for adjusting the chain tension on single-speed and fixed-gear bicycles. Some dropout adjusters are also designed to be used when converting a frame from one type of wheel to another.

Dropout adjusters are a popular accessory for cyclists, with around 80% of bicycles having at least one set installed. This is due to the wide range of uses they provide, as well as their affordability and ease of installation. Dropout adjusters are typically made from steel, aluminum, or titanium, and come in various sizes and shapes to suit different frames.

Dropout adjusters offer cyclists a great way to customize their bike and make it more suitable for their own needs. Whether you need to adjust the chainstay length, fit a different wheel size, or just need to adjust the chain tension, dropout adjusters are a great way to do it.

The History of 'Dropout Adjusters' in Cycling

The term 'dropout adjusters' is a common term in cycling that refers to the adjustable components used to hold the rear wheel in the frame of a bicycle. The term was first used in the early 1900s in England to describe the adjustable components used to keep the rear wheel of a bicycle from slipping out of the frame.

In the early days of cycling, the adjustable components were made of metal and were often referred to as 'dropouts'. This term was used to describe the adjustable components that allowed the rear wheel of a bicycle to be removed from the frame. As technology improved, the adjustable components became more sophisticated and the term 'dropout adjusters' was adopted to describe the adjustable components used to keep the rear wheel of a bicycle from slipping out of the frame.

Today, dropout adjusters are an essential part of any bicycle, allowing the rear wheel to be quickly and easily removed from the frame. Without them, it would be difficult to make adjustments to the geometry of the frame or to replace a damaged wheel. Dropout adjusters have come a long way since they were first used in the early 1900s, and they remain an essential component of any bicycle.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

Saddle Slang

Find definitions for all of the technical terms, slang, and acronyms used in cycling. From the different types of bikes and their components, to training techniques, racing terminology and put downs, this dictionary has it all.

Talk the Talk
1 of 3