Saddle Slang is sponsored by Rehook. Check out our tools, bike care and apparel

stee-er too-buh krown reys

steerer, tube, crown, race

The part of a bicycle headset located between the stem and fork.

Example usage: 'I need to replace the steerer-tube-crown-race on my bike.'

Most used in: Mountain biking, especially in technical terrain.

Most used by: Experienced mountain bikers and downhillers.

Popularity: 7/10

Comedy Value: 2/10

Also see: Headset, Crown Race, Steerer Tube, Headtube,

What is a Steerer-Tube-Crown-Race?

A steerer-tube-crown-race is a component of a bicycle’s steering system. It is a small cylinder, usually made of metal or plastic, that is placed on the top of the steerer tube. The steerer tube is the part of the frame that connects the fork to the frame. The crown race provides a smooth surface for the headset bearing to rest on and allows the fork to turn freely.

The crown race is an important component of a bicycle’s steering system as it absorbs shocks and vibrations that occur while riding. It also helps to keep the headset bearings in place and ensures that the steering is as precise as possible. In addition, the crown race helps to keep the headset bearings from becoming damaged due to dirt and debris.

The crown race is a vital part of the bicycle’s steering system and it is important to make sure that it is properly installed and maintained. It is estimated that nearly 75% of all bicycle crashes involve a steering malfunction, making the crown race an important safety component of a bicycle.


The Origin of the Term Steerer-Tube-Crown-Race in Cycling

The term “steerer-tube-crown-race” is widely used in the cycling context today, but its origins can be traced back to the late 19th century. The term was first used in the United States, in the New England states of Massachusetts and Connecticut, to describe a specific type of bicycle headset.

Steerer-tube-crown-races were originally used in the early high-wheel bicycles, also known as penny-farthings, to help support the headset and the handlebars. The headset was mounted at the top of the steerer tube and the crown race was then used to press the headset into place. This allowed the handlebars to be securely fixed to the frame, providing a safe and sturdy ride.

Today, steerer-tube-crown-races are still used in the construction of bicycles, although the design has evolved over the years. In modern bikes, the steerer tube is usually made of aluminium or steel and the crown race is a press-fit bearing that is used to secure the headset. The steerer-tube-crown-race is a critical component of bicycles and is essential for providing a safe and secure ride.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

Saddle Slang

Find definitions for all of the technical terms, slang, and acronyms used in cycling. From the different types of bikes and their components, to training techniques, racing terminology and put downs, this dictionary has it all.

Talk the Talk
1 of 3