Getting started
Chains
Step 1 - Hook
Step 2 - Fit
Step 3 - Turn
Gears
Strap
Tyre Levers
Screws and Hex
Wrenches
Spoke Keys
Rehooks unique patented design keeps oil and dirt away from your hands and clothes - No more jammed fingers and oily bar tape!
Rehook PLUS incorporates tyre levers, wrenches, spoke keys, screwdriver and hex heads with the classic Rehook tool head. Your new road side cycle tool kit and the definitive lightweight multi-tool. Ideal for dropped chains, tyre changes and a range of roadside issues.
Follow these easy steps for best instant results
Getting started
Step 1 - Tuck the additional blue tyre lever under the rim
at the top of the main body.
Step 2 - Push together to secure the two parts. It will make
a satisfying click if it is positioned correctly.
To allow the additional blue tyre lever to be attached
securely, ensure screw and Hex heads are inserted firmly
at the positions shown.
The lever can then be easily removed by pushing
the blue hexagon on the front of the tool.
Chains
To replace a dropped chain just Hook, Fit and Turn...
Hook - Use Rehook to hook your dropped chain
Fit - Put the chain back on at the top of the gears
Turn - Use Rehook as a handle to turn your gears forward
Step 1 - Hook
Use the hook at the end of the tool to grab the chain. This should grip both side of the link with the pin through the middle of the chain.
Hint: Hook the chain from the section under the front sprocket, then pull this part onto the top of the sprocket.
Step 2 - Fit
Pull the chain onto the top of the sprocket and place onto the gear.Hint: Make sure you put the chain onto the gear which is currently selected, to avoid it slipping again.
Step 3 - Turn
The chain should now be on most of the teeth of the gear. With one hand, lift the weight off the back wheel. With the other hand, turn the crank forward.
Your chain should now be back on the bike with little effort. If the chain repeatedly comes off, then you may need to address your gear set up or the length of the chain.
Gears
Also great for rear gears, Rehook fits into small gaps that fingers can’t reach and makes a multitude of chain related tasks and jams much simpler to resolve.
Strap
The high grip silicon strap can be attached to your bike frame. Usually the down tube is the best spot to attach it to.
Hint: The strap grips best when it's on a looser hole (which is a bit counter intuitive) if it's over-tightened then the holes become larger and it isn't as firm.
Tyre Levers
Press the blue hexagon to separate the blue lever from your Rehook PLUS.
We have designed Rehook PLUS to have one tyre lever which is similar to a Park or Pedro with a wide lever, spoke clip and box construction for strength. The other lever (on the end of the black Rehook tool handle) has a finer edge and is straight rather than curved so it is as easy as possible to run around the rim. The Black lever is designed to do the heavy lifting and the blue lever comes with a spoke clip. the spoke clip attaches onto your wheel to hold the tyre in place while you work the rest of the tyre off with the black lever.
Hint: You should always ensure tyres are fully deflated before removing them from a wheel. Always begin by pushing the deflated tyre bead to the centre of the rim all of the way around the wheel. Start near the valve when removing a tyre and end near the valve when putting the tyre back on.
To patch up a damaged inner tube you can use our Rehook Gooeys glue-less puncture repair kits
Screws and Hex
Rehook PLUS comes equipped with a Philips PH1 screwdriver, H5 and H6 Hex/Allen keys.
Step 1 -
Push the blue hexagon to reveal the interchangeable screw driver bits inside.
Hint: You can tap the bits into your hand or remove them with the blue tyre lever.
Step 2 -
Once removed, you can place the bits into the 6mm magnetic socket on the front of the tool.
Wrenches
Rehook PLUS comes with 8mm, 9mm and 10mm wrenches.
Simply remove the blue tyre lever and attach the correct size wrench to a bolt.
Hint: Make sure to use the correct size wrench to avoid rounding the nut or bolt.
Spoke Keys
Rehook PLUS has 2 sizes of spoke keys. The left key (3.23mm) is used on most bikes. The right key (3.45mm) is more commonly used on e-bikes and tandems.
FAQ
Question: Can this be used on all types of bike?
Answer: Yes, Rehook PLUS is designed to work with a range of bicycles including e-bikes, Brompton's, road, MTB, hybrid, gravel etc. Rehook PLUS has multiple attachments which can be made useful for all types of bicycle.
Question: Is it strong?
Answer: Yes, it is extremely durable and lightweight, because it is made from the highest quality materials and processes, right here in the UK.
For any further questions you can reach us at hello@rehook.bike