Krangkset krangking
Verb, Noun
The act of spinning the pedals of a bicycle by pushing down and pulling up on the crankset
Example usage: I'm crankset-cranking up this hill with ease.
Most used in: Mountain biking and road cycling.
Most used by: Experienced cyclists who are familiar with the terminology.
Popularity: 8/10
Comedy Value: 2/10
Also see: crankarms, chainrings, bottom bracket, pedal arms,
What is a Crankset-Cranking in Cycling?
Crankset-cranking is a cycling term used to describe the action of pushing a pedal with a crank arm to rotate the crankset. The crankset is the central assembly of the bicycle chain drive system that connects the pedals to the rear wheel. It consists of the crankarms, the chainrings, and the bottom bracket.
The crankset-cranking action is the most important part of the cycling power transfer system. It is responsible for turning the pedals and transferring the energy from the rider's legs into the force that propels the bike forward. The crankset-cranking movement is the most efficient way to generate power and speed while cycling.
According to a study by the International Journal of Sports Medicine, cyclists who use a crankset-cranking action during their ride can generate up to 20% more power than those who pedal in a circular motion. This is due to the higher efficiency of the crankset-cranking movement in comparison to other pedaling techniques.
In conclusion, crankset-cranking is an important cycling term used to describe the pushing of a pedal with a crank arm to rotate the crankset. This action is the most efficient way to transfer energy from the rider's legs into the force that propels the bike forward. Studies have also shown that cyclists who use a crankset-cranking action during their ride can generate up to 20% more power than those who pedal in a circular motion.
The Origin of the Term 'Crankset-Cranking' in Cycling
The term 'crankset-cranking' refers to the act of pedaling a bicycle. It is believed to have originated in the United States in the early 20th century, with the first use of the term being recorded in a magazine article in 1912. The term is commonly used to describe the act of pushing the pedals of a bicycle in order to generate forward movement.
The term 'crankset-cranking' is derived from the parts of a bicycle that are used in the act of pedaling. The crankset is the part of a bicycle that houses the pedals and connects them to the chain and sprocket. The act of pushing the pedals is then referred to as 'cranking' the crankset.
The term 'crankset-cranking' has become a popular phrase in the cycling community and is used to describe the act of pedaling a bicycle. It is a useful term that helps to illustrate the mechanics of a bicycle and the act of pedaling.
