Step 1 - Hook
Step 2 - Fit
Step 3 - Turn
Gears
FAQ
Rehook Original gets your chain back on your bike in 3 seconds. Without the mess!
Rehooks unique patented design keeps oil and dirt away from your hands and clothes - No more jammed fingers and oily bar tape!
Follow these easy steps for best instant results
Hook - Use Rehook to hook your dropped chain
Fit - Put the chain back on at the top of the gears
Turn - Use Rehook as a handle to turn your gears forward
Step 1 - Hook
Use the hook at the end of the tool to grab the chain. This should grip both side of the link with the pin through the middle of the chain.
Hint: Hook the chain from the section under the front sprocket, then pull this part onto the top of the sprocket.
Step 2 - Fit
Pull the chain onto the top of the sprocket and place onto the gear.Hint: Make sure you put the chain onto the gear which is currently selected, to avoid it slipping again.
Step 3 - Turn
The chain should now be on most of the teeth of the gear. With one hand, lift the weight off the back wheel. With the other hand, turn the crank forward.
Your chain should now be back on the bike with little effort. If the chain repeatedly comes off, then you may need to address your gear set up or the length of the chain.
Gears
Also great for rear gears, Rehook fits into small gaps that fingers can’t reach and makes a multitude of chain related tasks and jams much simpler to resolve.
FAQ
Question: Can this be used on all bike types?
Answer: Yes, Rehook is designed to work with any bike, including e-bikes, Brompton's, road, MTB, hybrid, gravel etc.
Question: Is it strong?
Answer: Yes, it is extremely durable and lightweight, because it is made from the highest quality materials and processes, right here in the UK.
For any further questions you can reach us at hello@rehook.bike
